Insulation glue is a very practical adhesive. It not only has excellent performance itself, but also cooperates with appropriate construction technology to achieve good results. Therefore, thermal insulation glue must cooperate with thermal insulation material enterprises, continuously develop and try it out, so that it can be accepted by the market as soon as possible.

　　Uetersen special glue is mainly used for bonding various thermal insulation materials. The thermal insulation glue is energy-saving and environmentally friendly, easy to operate, and has a short drying time. After drying, it has strong anti-moisture permeability and strong weather resistance, which can effectively prevent the penetration of water vapor at the joints, thereby ensuring the operation of the entire thermal insulation system. Used in conjunction with thermal insulation materials, it improves the ability of the joints of thermal insulation materials to resist water vapor penetration, ensures the air tightness and integrity of the system, ensures good thermal insulation effects and prevents condensation.

　　Bonding of insulation materials

　　When applying glue, it is recommended to use a special thermal insulation glue that matches the thermal insulation material, so that the paste is firmer and can be used for a long time. It is recommended to apply the glue evenly with a short-bristle brush, and then lightly press and paste the side of the insulation board to the fire pipe. When pasting, pay attention to laying the insulation board flat. When attaching special parts such as elbows, it may be necessary to cut the insulation board first, assemble it into a corresponding angle, and then wrap it on the pipe.

　　For fire water systems such as fire hydrant pipes, sprinkler pipes, etc., the thickness of the thermal insulation material shall meet the requirements of the construction drawings. Note that some seams and gaps should be glued with special glue. During construction in winter, pay attention to the outdoor temperature not to be too low. If it is lower than 5 °C, it will affect the bonding effect of the glue, and then affect the entire insulation project.

• Previous：Uetersen Installation Services
• Next：Insulation nail sample display